Enable The Sync Button; Turn The Satellite Led Lighting On Or Off - NETGEAR RBS50Yv2 User Manual

Enable the Sync button

After your satellite syncs with your router, the satellite's Sync button is disabled for
security reasons. If you press the Sync button and the satellite's bottom Light LED pulses
magenta, this LED behavior indicates that the Sync button is disabled. To enable the
Sync button, log in to the router and go to the Attached Devices page.
After syncing your satellite and placing your satellite outdoors, we recommend that you
disable the Sync button to prevent an unauthorized user from connecting to your
satellite.
To enable your satellite's Sync button using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Attached Devices page displays.
5. Select your satellite.
The Edit Device page displays.
6. In the Sync Button section, click the Disabled button.
The Sync button is enabled. You can now use the Sync button to sync your satellite
to your router.

Turn the satellite LED lighting on or off

You can use the satellite's top and bottom Light LEDs to provide light to your outdoor
area.
Manage Your Orbi Outdoor
Satellite
Orbi Outdoor Satellite
23 User Manual