Related Manuals for NETGEAR 2409
Summary of Contents for NETGEAR 2409
- Page 1 Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 201-10080-01 Version 1.0 March 2004...
- Page 2 In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
- Page 3 EU regulations. Safety The NETGEAR wireless devices WG302, FWG114P, FVM318, ME103, and FM114P have been tested with the antenna ANT2409 and have successfully passed all relevant tests contained in the Standard for the Safety of Information Technology Equipment for Europe (EN 60950-2000) equivalent to North American Standards UL 60950, Third Edition, CAN/CSA-C22.2 No.
- Page 4 201-10080-01...
-
Page 5: Table Of Contents
Chapter 1 Getting Started with the ANT2409 Welcome ...1-1 Package Contents ...1-1 Pole Mount Configuration ...1-3 Flat Surface Mount Configuration ...1-4 Placement and Other Important Considerations ...1-5 Chapter 2 Installing the 9 dBi Omni-directional Antenna First, Assemble and Mount the Antenna ...2-2 Now, Connect the Antenna ...2-3 Connecting the Antenna for and Outdoor Installation ...2-3 Connecting the Antenna for an Indoor Installation ...2-5... - Page 6 Contents...
-
Page 7: Getting Started With The Ant2409
Chapter 1 Getting Started with the ANT2409 Welcome Thank you for purchasing the NETGEAR ANT2409 antenna. This Installation Guide provides installing instructions and guidelines for using the NETGEAR 9 dBi Omni-directional Antenna. Package Contents Figure 1-1: Package contents The package should contain the following items:... - Page 8 • Warranty and Support Information card If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. Antenna cable for connecting the wireless device is sold separately. Please use a NETGEAR model ACC-10314-01, 02, 03, 04, or 05 cable.
-
Page 9: Pole Mount Configuration
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 Pole Mount Configuration This illustration shows the pole mount configuration option. Figure 1-2: Antenna Assembled in Pole Mount Configuration Getting Started with the ANT2409... -
Page 10: Flat Surface Mount Configuration
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 Flat Surface Mount Configuration This illustration shows a flat surface mount configuration. Figure 1-3: Antenna Assembled in the Flat Surface Mount Configuration Note: For wall mount installation, the L-bracket is not used. Getting Started with the ANT2409... -
Page 11: Placement And Other Important Considerations
Ideally, it should be located outside an IT data center or outside a room with multiple metal partitions. Use a NETGEAR antenna cable of up to 10 m length to connect the antenna to the wireless access point/router. In some situations one ANT2409 is sufficient because the multipath fading is low or acceptable and/or the client adapter wireless node provide spatial diversity. - Page 12 The best performance is achieved with a short cable between the antenna and the wireless device. The shortest approved cable to be used in conjunction with the ANT2409 in North America is the NETGEAR 1.5 m (ACC-10314-01) cable. • The antenna should be installed so that it is a minimum of 30 cm (12 inches) away from people.
-
Page 13: Installing The 9 Dbi Omni-Directional Antenna
Installing the 9 dBi Omni-directional Antenna There are two parts to the wireless antenna installation process: • Assemble the wireless antenna for pole mount installation or flat surface mount installation. • Connect the appropriate electrical hardware depending on if the installation is indoors or outdoors. -
Page 14: First, Assemble And Mount The Antenna
Note: Use the correct cable. • Outdoors: use the provided 2m antenna cable. • Indoors: use the provided N/SMA adapter with a Netgear ACC-10314-01, 02, 03, 04 or 05 (sold separately). For indoors, d provided 2m cable. Step 2 Securely attach the antenna cable by screwing it onto the antenna. -
Page 15: Now, Connect The Antenna
Now, Connect the Antenna The instructions below cover outdoor and indoor installations. Connecting the Antenna for and Outdoor Installation Turn off your wireless unit. In the procedure “First, Assemble and Mount the Antenna” on page have been assembled for outdoor installation using the provided 2-meter cable. Connect the other side of the cable to the lighting arrestor as shown here. - Page 16 Locate the primary detachable antenna on the wireless access point. Remove the antenna and connect the other end of the NETGEAR cable ACC-10314-01, 02, 03, 04 or 05 to this port. NOTE: On access points with two antennas, if you are only replacing one antenna, be sure to replace the primary antenna and do not remove the secondary antenna.
-
Page 17: Connecting The Antenna For An Indoor Installation
In the procedure “First, Assemble and Mount the Antenna” on page have been assembled for indoor installation using a NETGEAR cable ACC-10314-01, 02, 03, 04 or 05 and the reverse N/SMA adaptor connected to the antenna. The provided 2m cable should not have been used. - Page 18 Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 Installing the 9 dBi Omni-directional Antenna...
-
Page 19: Specifications
This chapter provides the 9 dBi Omni-directional Antenna specifications. 9 dBi Omni-directional Antenna and Mounting Assembly Specifications Usage OUTDOOR and INDOOR Frequency Range 2400 - 2485 MHz Type Omnidirectional Impedance 50 Ohms nominal ≤ 2.0 Return Loss < -10 dB Gain 8.5 dBi Polarization... -
Page 20: Meter Antenna Cable
2 Meter Antenna Cable Frequency Range VSWR Cable Type Transmission Loss Connector Type Max. Working Voltage Minimum Bend Radius Jacket Recommended coupling nut torque Coupling nut retention force Connector Body & Contact Insulation Storage, Transportation & Operating Temperature Storage, Transportation & Operating Humidity Waterproof 0 - 3 GHz... -
Page 21: N/Sma Adaptor Accessory
N/SMA Adaptor Accessory Frequency Range VSWR Connector Type Insulation Resistance Center Contact Resistance Outer Contact Resistance Working Voltage Impedance Body & Center Contacts Insulation Gasket Storage & Operating Temperature Specifications 0 - 3 GHz 1.5 max. N type Male reverse to SMA Female reverse 1000 MOhms 6 mOhms 2 mOhms... -
Page 22: Lightening Arrestor
Lightening Arrestor Frequency Range 0 to 3 GHz VSWR 1.5 max. Insertion Loss 1.2 dB max. Impulse Breakdown 600 V min. (Voltage on upgrade ratio Voltage @100V/S) Max. Power Rating 200 W Impedance 50 ± 5 Ohm Insulation Resistance 1000 MOhm Max. -
Page 23: Radiation Pattern: Elevation (Vertical Plane)
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 Radiation Pattern: Elevation (Vertical plane) Specifications... -
Page 24: Radiation Pattern: Azimuth (Horizontal Plane)
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409 Radiation Pattern: Azimuth (Horizontal plane) Specifications...