Sync Your Satellite Using The Router Web Interface - NETGEAR RBS50Yv2 User Manual

After the bottom Light LED lights white, it lights one of the following colors for about
three minutes and then turns off:
• Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
• Amber. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is fair. Consider moving the Orbi satellite closer
to the Orbi router.
• Magenta. The Orbi router and satellite failed to sync. Move the satellite closer
to the router and try again.
6. Move your satellite outdoors and connect it to a power source.
Note: The recommend temperature range for your satellite is 4°F to 122°F (–20°C
to +50°C).
7. Make sure that the bottom Light LED lights blue to indicate a good connection to
the router.

Sync Your Satellite Using the Router Web Interface

You can use the router web interface to add a satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Satellite.
The Place Your Satellite page displays.
5. Follow the instructions for where to place your satellite in your house.
6. Connect the satellite to a power source.
7. If the Power LED on the back of the satellite does not light, press the Power On/Off
button.
Overview
Orbi Outdoor Satellite
16 User Manual