Shark duo clean QU202Q Series Quick Start Manual

MAINTENANCE

Empty dust cup after each use
Empty
Release
Self-Cleaning Brushroll
NOTE: If any hair is wrapped around the brushroll, extending cleaning time will allow
the self-cleaning brushroll to remove it for you.

Cleaning the Brushroll

1. To open the brushroll garage, slide both
release buttons on the floor nozzle away
from you, towards the back of the nozzle,
then lift off the lid.
2. Clear away any objects or debris.
3. To close the brushroll garage, insert
the 3 tabs on top of the lid into the 3 slots
in the nozzle, then push down on both sides
of the lid until it clicks securely into place. If
the Brushroll Indicator Light isn't green and
headlights are flashing, check again that
both sides of the lid are locked in place.
To register your product, or for answers to frequently asked questions, visit registeryourshark.com.
© 2020 SharkNinja Operating LLC. DUOCLEAN and SHARK are registered trademarks of SharkNinja Operating LLC.
QU202Q_QSG_MP_Mv2

Filter Maintenance

Wash filters regularly to keep
the suction strong.
Rinse filters with water only, and
allow them to air-dry before
reinstalling. Tap loose dirt from
filters as needed between
washes.
See enclosed Owner's Guide
for complete details on
removing and cleaning filters.

Brushroll Maintenance

Carefully remove any debris that may be
impeding the brushroll.

Cleaning the Soft Roller

Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Please be sure to read the enclosed Shark
SLIM UPRIGHT
with Shark® Self-Cleaning Brushroll
QU202Q Series
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum's great features.
®
Owner's Guide prior to using your unit.