Toro 2000 Series Operator's Manual page 2

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Please refer to the engine manufacturer's information
included with the machine.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
Introduction
This rotary-blade, riding lawn mower is intended to be
used by professional, hired operators. It is designed
primarily for cutting grass on well-maintained lawns
on residential or commercial properties. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number decal to access warranty, parts, and other
product information.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Model No.
Serial No.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
The safety-alert symbol
this manual and on the machine to identify important
safety messages that you must follow to avoid
accidents. This symbol will appear with the word
Danger, Warning, or Caution.
•
Danger indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
•
Warning indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
Figure 1
•
Caution indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
2
Figure 1
(Figure 2) appears both in
Figure 2
Safety-alert symbol
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g233855
sa-black