Operation And Controls - Whynter BWR-0922DZ Instruction Manual

92 bottle built-in stainless steel dual zone compressor wine refrigerator with display rack and led display
Hide thumbs Also See for BWR-0922DZ:
Table of Contents

Advertisement

Operation and Controls

It is recommended you install the appliance in a place where the ambient temperature is between 72º- 78ºF /
23º-26ºC. If the ambient temperature is above or below recommended temperatures, the performance of the wine
refrigerator may be affected. For example, placing your appliance in extreme cold or hot conditions may cause
interior temperatures to fluctuate.
NOTE:
When using the wine refrigerator for the first time or restarting after being shut off for a long period of time, there may
be a few degrees variance between the set temperature and the LED readout. This is normal due the length of
activation time. The unit should return to normal after running for a few hours. The internal temperature of this unit
will not rise if the ambient temperature where the unit is located is lower than the set temperature.
RECOMMENDED TEMPERATURE SETTINGS
Conservation
Red Wines
Dry/White Wines
Rose Wines
Sparkling Wines
CONTROL PANEL GUIDE
POWER
To turn the appliance on/off, press and hold the
UP
To increase (warm) the set temperature by 1°C or 1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.
LIGHT
Used to turn the internal light on and off.
DISPLAY
is for UPPER temperature zone and
ºF/ºC SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
49 - 57ºF
58 - 72ºF
48 - 57ºF
49 - 51ºF
40 - 47ºF
and
key for 5 seconds.
is for LOWER temperature zone.
10
10 - 14ºC
15 - 22ºC
9 - 14ºC
10 - 11ºC
5 - 8ºC

Advertisement

Table of Contents
loading

Table of Contents