Table of Contents
Advertisement
EXPLODED VIEW
Part
1
Front Glass with Frame
2
Emberbed with Logset
3
Emberbed Circuit Board
4
Flame Circuit Board
5
Flame Generator Drive Motor
6
Control Panel Circuit Board
7
Main Circuit Board
8
Thermostat Sensor
9
Heater/Blower Assembly
10
Remote Control
CARE AND MAINTENANCE
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
A549
Part Name
13
Part Number
Y17-S215-P27
Y17-S215-P02
Y17-S215-P44E
Y17-S215-P40
P10-6-Q
Y17-S215-P32
Y17-S215-P15
INS-NTC
Y17-S215-P01
P136
www.tsicustomerservice.com
Advertisement
Table of Contents
