Cisco DPC3941 User Manual page 40

Chapter 2 Installing the DOCSIS Wireless Residential Voice Gateway
Edit 2.4 GHz
This section describes how to configure wireless settings for the 2.4 GHz wireless
network.
Use the descriptions and instructions in the following table to manually configure
the basic settings for wireless communication for the Wireless Residential Gateway.
After you make your selections, click Save Settings to apply your changes or
Restore Default Settings to set values back to factory default values.
Section
Wireless Network
Network Name for
2.4 GHz (SSID)
24
Field Description
Wireless Network. Use this setting to Enable or Disable the wireless
network.
The SSID is the name of your wireless network. The SSID is used by
wireless technology to identify your network from other wireless
networks in the area. The SSID can be up to 32 characters long. The
factory default SSID is HOME-XXXX-2.4 where XXXXare the last 4
digits of cable modem MAC address found on the label located on the
bottom of your Wireless Residential Gateway.
This SSID is a unique identity and does not need to be changed unless
you choose to do so.
OL-29163-01 Rev A