Cisco DPC3941 User Manual page 26

Chapter 1 Introducing the DOCSIS Wireless Residential Voice Gateway
1 RESET—A momentary pressing (1-2 seconds) of this switch restarts the device.
Pressing and holding the switch for more than ten seconds first causes a reset-to-
factory-default of all settings and then restarts the device
2 USB (optional for some models)—Connects the residential gateway to selected
devices. For models that support USB, the default is one USB port.
3 TELEPHONE 1 and 2—RJ-11 telephone ports for connecting home telephone
wiring to conventional telephones or fax machines.
4 ETHERNET—Four RJ-45 Ethernet ports to allow connection to the Ethernet port
on your PC or your home network
5 MoCA/Cable—F-connector connects to your home coax network to provide
Cable and MoCA service
6 POWER—Connects the residential gateway to the AC wall outlet
10
CAUTION:
The RESET button is for maintenance purposes only. Do not use unless
instructed to do so by your service provider. Doing so may cause you to lose
any settings you have selected.
OL-29163-01 Rev A