[Switch Mode] - Panasonic AK-UC4000G Operating Instructions Manual

[!LED]
For items whose setting is [ON], the LED in the viewfinder (
Item
[!LED MODE]
[GAMMA OFF]
[SHUTTER]
[EXTENDER]
[FAN OFF]
[MASTER GAIN]
[BLACK GAMMA]
[RETURN MIX]
Item
[RETURN MIX SW]
[MIX RATIO]

[SWITCH MODE]

[USER SWITCH]
Item
[GRIP RET]
[GRIP PTT]
[LENS VTR]
[LENS RET1]
[LENS RET2]
[LENS RET3]
[EXTERNAL RET1]
[EXTERNAL RET2]
[EXTERNAL RET3]
Chapter 4 Menu Operations — Menu list
) lights up when the operating status of the camera becomes irregular.
Enables/disables the yellow tally function for the front VF's !LED lamp.
[NORMAL], [YELLOW TALLY]
• • Factory setting: [NORMAL]
Shows/hides the status display when gamma is disabled.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the status display when the electronic shutter is enabled.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the status display when the lens extender is enabled.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the status display when the fan is off.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the status display when the gain is other than 0 dB.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the status display when the black gamma is enabled.
[OFF], [ON]
• • Factory setting: [OFF]
Enables/disables the composite function for the CAM video and the return video.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the composite ratio for the CAM video and the return video's composite function.
[1]...[99]
• • Factory setting: [50]
Selects the grip <RET> switch function.
[A], [B], [C], [PTT]
• • Factory setting: [A]
Selects the grip <PTT> switch function.
[PTT], [A], [B], [C]
• • Factory setting: [PTT]
Selects the <VTR> switch function of the handy lens.
[A], [B], [C], [PTT], [DISP], [MARK OFF], [LENS EXT], [D.EXT] , [C.TEMP], [CENTER], [ASSIST], [LVL
G RESET], [FA_INRED], [FA_SQ], [FA_BAR], [FA_MAG], [RETURN MIX], [INH]
• • Factory setting: [B]
Selects the <RET1> switch function of the standard lens.
[A], [B], [C], [PTT], [DISP], [MARK OFF], [LENS EXT], [D.EXT] , [C.TEMP], [CENTER], [ASSIST], [LVL
G RESET], [FA_INRED], [FA_SQ], [FA_BAR], [FA_MAG], [RETURN MIX]
• • Factory setting: [A]
Selects the <RET2> switch function of the standard lens.
[A], [B], [C], [PTT], [DISP], [MARK OFF], [LENS EXT], [D.EXT] , [C.TEMP], [CENTER], [ASSIST], [LVL
G RESET], [FA_INRED], [FA_SQ], [FA_BAR], [FA_MAG], [RETURN MIX]
• • Factory setting: [B]
Selects the <RET3> switch function of the standard lens.
[A], [B], [C], [PTT], [DISP], [MARK OFF], [LENS EXT], [D.EXT] , [C.TEMP], [CENTER], [ASSIST], [LVL
G RESET], [FA_INRED], [FA_SQ], [FA_BAR], [FA_MAG], [RETURN MIX]
• • Factory setting: [C]
Selects the function of external return control switch 1.
[A], [B], [C], [D.EXT]
• • Factory setting: [A]
Selects the function of external return control switch 2.
[A], [B], [C], [D.EXT]
• • Factory setting: [B]
Selects the function of external return control switch 3.
[A], [B], [C], [D.EXT]
• • Factory setting: [B]
– 46 –
Description of settings
Description of settings
Description of settings