PAX Salsa User And Installation Manual page 4

EN
Important!
Warning!
Installation
Cleaning
4
Carefully read these instructions before use.
The towel warmer is designed for fixed installation 230V AC 50Hz and should be installed by a qualified
Class I, must be protectively earthed. Technical data: See type plate.
According to the standard EN 60335, the following
shall be considered: This appliance can be used by
children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been
– Always isolate the product from the electric power supply before starting any installation work.
– The towel warmer must be installed with the connector housing turned downward, see Figure 5.
– To avoid any risk to small children, the towel warmer's lowest horizontal rung should have a distance
of at least 600 mm to the floor.
– Towel warmers reaches a temperature of about 60 ° C, which may feel warm to touch.
– The towel warmer is only to be used for drying fabrics washed in water.
– If the mains cable with plug is damaged, the manufacturer or other qualified person must
replace the cable. The cable is available as a spare part from dealers and the manufacturer.
Pax Salsa, Samba, Tango and Mambo are designed for concealed and surface-mounted connection and must be
installed by a qualified technician. The towel warmer must be installed with the switch down.
Concealed electric:
The towel warmer can be wiped clean a damp cloth and detergent. Do not use solvents.
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
User and installation guide