Kohler K-1239 Roughing-In Manual page 2

18"
(45.7 cm)
1-11/16"
(4.3 cm)
8-11/16" (22.1 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style
Integral flange, left drain
Integral flange, right drain
Fixture*:
Bathing well:
Basin area, bottom 46" (116.8 cm) x 24" (61 cm)
Basin area, top 54" (137.2 cm) x 27" (68.6 cm)
Weight 105 lbs (47.6 kg)
To overflow:
Water depth 14" (35.6 cm)
Capacity 63 gal (238.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58" (147.3 cm) x 34" (86.4 cm)
V
Pump: 1-speed 120
Minimum access panel
pump/control (required):
1014695-1-B
60" (152.4 cm)
1" (2.5 cm)
2-7/8"
(7.3 cm)
3"
(7.6 cm)
K-1239
K-1239-L
K-1239-R
Hz A
60 7.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
Pump/Control Access
(If Apron Is Not Used)
20" (50.8 cm) W x
15" (38.1 cm) H
36" (91.4 cm)
20"
18-1/2"
(50.8 cm)
(47 cm)
1-1/2" OD
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
44 lbs/square foot (214 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral Flange
Detail
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
120 V, 15 A, 60 Hz
Kohler Co.