Installation; Attaching The Stand - Samsung C49RG9 Series User Manual

Installation

Attaching the Stand

x 2
Caution
Hold the stand neck with both hands, not one
hand, to prevent it from falling off and causing
injury.
1
Insert the stand base into the stand neck in the
direction as shown in the figure.
1 7
Stand up the monitor as shown in the figure.
x 4
1
Place the stand neck on the monitor as shown
in the figure.
1
Disassemble the COVER-REAR TOP.
1 8
Remove the package.
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When
the product is on the ground facing up or down, do not put pressure on it.
― There is a risk of scratch damage if the screwdriver comes in contact with the product surface while fastening the
screws. Make sure the screwdriver does not touch the surface.
Caution
Tilt the stand neck to sides to avoid contact with the
screwdriver.
1
Assemble the COVER-REAR TOP to the stand neck as shown
in the figure.
1
Fasten the screws at the top of the stand neck.
1 6
Rotate the COVER-REAR TOP clockwise.
16