Table of Contents
Advertisement
Cleaning and maintenance
en
Cleaning the base unit
You can clean the appliance's base unit
if it has fluff in it, for example.
Allow the appliance to cool down
Note:
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
To open the maintenance flap, take
1.
hold of it at the top at both sides and
pull it down.
Clean the maintenance flap with a
2.
soft, damp cloth.
Unlock the levers on the heat
3.
exchanger cover.
42
Pull the heat exchanger cover out by
4.
its grip.
Use a soft brush to clean the heat
5.
exchanger cover.
Make sure that no dirt or
Note:
debris is left on the seal.
Pull the insert out horizontally.
6.
Rinse the insert under running water
7.
and dry it off.
Advertisement
Table of Contents
