Table of Contents
Advertisement
Cleaning the base unit
You can clean the appliance's base unit
if it has fluff in it, for example.
Allow the appliance to cool down
Note:
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
To open the maintenance flap, take
1.
hold of it at the top at both sides and
pull it down.
Clean the maintenance flap with a
2.
soft, damp cloth.
Unlock the levers on the heat
3.
exchanger cover.
Cleaning and maintenance
Pull the heat exchanger cover out by
4.
its grip.
Use a soft brush to clean the heat
5.
exchanger cover.
Make sure that no dirt or
Note:
debris is left on the seal.
Pull the insert out horizontally.
6.
Rinse the insert under running water
7.
and dry it off.
en
41
Advertisement
Table of Contents
