Table of Contents
Advertisement
0
Programme settings
P r o g r a m m e s e t t i n g s
Buttons
Note:
Not all buttons and their functions can be activated in every programme. The activated settings are
illuminated particularly brightly to highlight them on the display. You can change or deactivate the activated
settings by repeatedly pressing on the relevant buttons on the display.
Drying target :
Ò
(Cupboard-dry plus)
» ü
(Cupboard-dry)
ö
(Iron Dry)
Adjust drying level
Indicators/
Explanations and notifications
symbols
Select the dryness level that you require for the laundry you
need to dry.
Multi-layered, thick laundry that does not dry readily.
Ò
Normal, single-layered laundry.
»
Normal, single-layered laundry that still needs to be damp after
ö
drying and is suitable for ironing or hanging up.
+1
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
+2
achieve a particular dryness level. To increase the dryness level,
+3
set the degree of dryness to between +1 and +3. This will
extend the programme duration but the temperature will remain
the same.
Press a dryness level, e.g. ö (Iron Dry), repeatedly until the
required degree of dryness +1, +2, +3 is shown.
Once you have adjusted the degree of dryness for a dryness
level, this setting will be retained even after the appliance has
been switched off.
Programme settings
en
25
Advertisement
Table of Contents
