Table of Contents
Advertisement
Raymarine Satellite TV Antenna Systems
Installing the ACU
1. The ACU should be installed using the 2 supplied mounting
brackets, which allow for a top or bottom mounting configu-
ration.
2. Using the supplied self tapping screws, attach the mount-
ing brackets to the sides of the ACU.
3. Place the ACU in the location where it is going to be
installed.
4. Connect the cables to the rear of the ACU.
5. Use a pencil to mark the 4 hole positions (2 each side),
and use the appropriate drill bit to drill them.
Figure 15 : Installation of ACU
20
Advertisement
Table of Contents
