Storage Hook Installation - Echo ProPaddle SRM-2400SB Operator's Manual

STORAGE
4. Insert plastic drum axles into
drums, and install assembly
hardware on axles to avoid loss
during storage.
5. Stand drums on outer ends to
prevent paddle fins from
deforming during storage.
6. Apply a thin coating of oil to
gearcase output shafts to
prevent rust.
7. Lubricate lower drive shaft with
grease. (Refer to Lubrication
instructions.)
8. Store ProPaddle components in
a cool, dry place. Store
gearcase/ lower driveshaft
assembly with gearcase down
to prevent lubricant leakage
from open shaft end.
DO NOT allow ProPaddle attachment to rest on paddle fins during
prolonged storage, or fins may become flattened.

Storage Hook Installation

1. Insert small end of hook into
locating hole on attachment
shaft.
2. Slide plastic cap onto end of
attachment shaft.
24
99944200620
X7532093907
© 1/2017 ECHO Inc.