Operation; Break-In; Sweeping Operation - Echo ProPaddle SRM-2400SB Operator's Manual

99944200620

OPERATION

Note: Refer to your PAS power source Operator's Manuals for
correct engine fueling, starting and stopping instructions.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit. Allow unit to
cool before performing service.

Break-In

1. ProPaddle sweeper drums with new paddle belts must be broken-in
before use to prevent the belts from gripping and dragging on hard
surfaces.
2. Grip the handles firmly, and
position ProPaddle well out in
front of your body.
3. Run the ProPaddle at full
throttle for 3 - 5 minutes on a
rough, abrasive surface such as
worn asphalt paving. Allow the
ProPaddle's weight to fully rest
on the paddle belts.
4. After break-in, the paddle belt
fins will slide easily over the
surface being cleaned,
providing more efficient
operation on a variety of
surfaces.

Sweeping Operation

Do not operate ProPaddle with paddles close to your body,
which could result in loss of control and possible serious injury.
X7532093907
© 1/2017 ECHO Inc.
OPERATION
17