Table of Contents
Advertisement
Center Speaker Setup
The ELAC UCR52 center channel speaker is designed to produce dialog sounds and should be positioned
above or below (Fig. 5) your television. Align it with the center of the television. As much as possible, try to keep
the UCR52 close to the same level (height) as your front speakers for a more even sound stage. Keeping the
same height for the center channel can be very challenging so it might be necessary to tilt the center speaker
up (if too low) or down (if too high), to aim it towards the listening area.
Place Above
Television
or Below
Fig. 5
Optimal results for the center are obtained by setting the receiver/processor center channel size to small. If you
have a choice, set the crossover frequency between 50Hz and 100Hz.
ELAC Uni-Fi Reference Speakers | www.elac.com | Page 9
Advertisement
Table of Contents
