Table of Contents
Advertisement
Philosophy
Thank you for purchasing this ELAC product.
Since the time we started (1926), ELAC has always striven to achieve the very best.
Your new ELAC speakers are built to the highest standards using high-quality components that are carefully
constructed to deliver the best-in-class sound quality. They are developed by a passionate group of individuals
whose soul purpose is to bring a new dimension of sound quality into your home. Enjoy!
Before Use
Avoid damage to the speakers and other components:
•
Carefully unbox the speakers carefully to avoid physically damaging your speakers.
•
Use appropriate gauge wires (minimum of 14 gauge wire for runs up to 25 feet).
•
Make sure wire polarity is connected correctly. Most speaker cables are coded for ease of use. Make
sure positive (red) connection on the amplifier terminal is connected to the positive (red) on your
speakers. Follow the same instructions for the negative side. Strip off approximately 1/2"of the insulation
from the ends of the speaker cable, twist the bare strands and insert into the binding post.
•
Ensure your equipment is turned off before connecting speakers.
•
Check to ensure positive and negative wires are not touching each other once they're connected to the
speaker terminals.
Most of the customers are connecting the speakers using a standard connection, but some customers prefer a
bi-wire or bi-amp connection of the speakers.
A standard speaker connection is shown in Fig.1. For a standard connection you need to keep the shorting bars
in place.
A bi-wire or bi-amp speaker connection is shown in Fig.2. For a bi-wire or bi-amp connection you need to re-
move both shorting bars.
Fig.1
ELAC Uni-Fi Reference Speakers | www.elac.com | Page 3
Amplifier
Terminals
Remove
shorting bar
Remove
shorting bar
High
Low
Amplifier
Terminals
Fig.2
Advertisement
Table of Contents
