Warning Icons And Error Codes; Meaning Of The Warning Icons; Meaning Of The Error Codes - Philips EP4010 User Manual

Warning icons and error codes

Meaning of the warning icons

Fill the water tank with fresh
water to the MAX level
indication.
ADD WATER
The bean hopper is empty.
Put new coffee beans in the
bean hopper.
ADD COFFEE
The brew group is not in the
machine or it is not inserted
correctly. Insert the brew
group.
The coffee grounds container
is full. Make sure the machine
is switched on. Then remove
and empty the coffee
grounds container.
If the display shows an error
10
code, check section 'Meaning
of the error codes' to see
what the code on the display
xx
means and what you can do.
The machine cannot be used
when this icon is on the
display.

Meaning of the error codes

Error code Problem
01 The coffee grinder is
blocked
03 - 04 There is a problem
with the brew group.
Below you find a list of the error codes showing problems that you can solve
yourself. Support videos are available on www.philips.com/coffee-support.
If another error code appears, please contact the Philips Consumer Care
Center in your country. For contact details, see the warranty leaflet.
Cause
The coffee exit duct is
clogged.
The brew group is
dirty or not well
greased.
The brew group is blocked by
coffee powder. Clean the brew
group.
Insert the drip tray and close
the service door.
The CoffeeSwitch is in the
wrong position for the selected
beverage. Push the lever down
to the ESPRESSO position.
The CoffeeSwitch is in the
wrong position for the selected
beverage. Push the lever up to
the COFFEE position.
Possible solution
Switch off the machine. Clean the
coffee exit duct thoroughly with the
handle of the measuring spoon or a
spoon handle. Then switch the
machine on again.
Switch off the machine. Rinse the
brew group with fresh water, let it air-
dry and then lubricate it (see
'Lubrication'). Then switch the
machine on again.
English
19