This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 3, 4, 5 for your safety. Please keep this manual in an easily accessible place and refer to it anytime. VK9820***** P/No.: MFL57001327 www.lg.com...
Table of contents Important safety instructions ... 3~5 How to use ... 6 Assembling vacuum cleaner ... 6~7 Operating vacuum cleaner ... 8 Using all floor nozzle ... 9 Using the accessory nozzles... 10 Basic using method of the steam cleaner ... 11 Vacuum cleaning, Steam cleaning, Simultaneous vacuum steam cleaning ...
• Do not use the vacuum cleaner if the power cord or plug is damaged or faulty. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard. • Do not use vacuum cleaner if it has been under water.
Page 4
IMPORTANT SAFETY INSTRUCTIONS WARNING • Be careful when using the product on hardwood, coated floor, brick floor and high quality floor etc. It can cause discoloration or deformation depending on the floor material. • Do not stay in one location or use it on the same location repeatedly.
Page 5
• Only use parts produced or recommended by LG Electronics Service Agents. Failure to do so could result in product damage. • Use only as described in this manual. Use only with LG recommended or approved attachments and accessories. Failure to do so could result in personal injury or product damage.
How to use Assembling vacuum cleaner Hose Handle Spring latch Telescopic pipe (depend on model) (depend on model) Steam cleaning vacuum tool Telescopic pipe • Push telescopic pipe firmly into hose handle. Push the nozzle into the telescopic pipe. • Grasp the spring latch to expand. •...
Page 7
Fitting pipe Flexible Hose Button Attachment Point Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner,press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operating vacuum cleaner Plug Cord reel button Control button How to operate Indicator and alarm sound • Pull out the power cord to • The indicator light of the hose the desired length and plug handle is on and alarm will into the socket.
How to use Using all floor nozzle All floor nozzle • The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. • Carpet or rug position Press the pedal ( •...
How to use Using the accessory nozzles Upholstery nozzle Upholstery nozzle Upholstery nozzle is for vacuuming upholstery, mattresses, etc. • Accessory nozzles include in the "PE BAG" with owner's manual. Dusting brush Dusting brush Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.
How to use Basic using method of the steam cleaner By using the steam cleaning vacuum tool,you can do vacuum cleaning and steam cleaning simultaneously or individually,in an easy way. Assembly and power ON/OFF Always hold the steam safety switch during steam cleaning. •...
How to use Vacuum cleaning, Steam cleaning, Simultaneous vacuum steam cleaning Vacuum cleaning Steam cleaning • Connect the carpet and floor • Connect the steam cleaning vacuum tool to nozzle or steam cleaning tool to the extension pipe. • When you lift the extension pipe up as •...
How to use When cleaning hardwood/laminated/general floor/carpet When removing old stain/floor stain When cleaning hardwood/laminated/general floor • Attach the microfiber cloth on the cloth board and install the steam cleaning vacuum tool. - When cleaning the hardwood/laminated/general floor, if you do not use the microfiber cloth, the hot steam will cause discoloration or deformation of the flooring material.
How to use How to supply water, How to replace and clean the microfiber cloth How to supply water • When the “SUPPLY WATER” light is turn on the LED display window of the nozzle, stop operating the steam cleaning vacuum tool and unplug the power. •...
How to use Using the sani punch nozzle Features This nozzle picks up even dust inside through beating. The bottom part can be separated to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. Sani punch nozzle Set the suction power control switch to MAX POWER before vacuuming.
Page 16
This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. Effective cleaning Bed & blanket When using on the bed Lay out the blanket and vacuum it on the bed. Bulky & heavy blanket When using on the floor It is easier to clean a light blanket or sheet by pushing the nozzle in the direction of the arrow.
Page 17
For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust. Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Page 18
Follow the instruction below for through washing. (Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction) Press the button on the rear side of the vacuum nozzle to separate the bottom plate.
Page 19
Push the button 2-3 times when the dust is filled in the dustbin while cleaning Waste the dust in the bin. When the dust is fully filled after cleaning, take the bin and turn it counterclockwise to disconnect Take the bin to fix into the projection part and then turn it clockwise to connect.
How to use Emptying dust tank Dust tank cap The dust tank needs emptying when indicator light is on. • Turn off the vacuum cleaner and unplug it. • Grasp the handle of the tank and then press the tank separation lever.
How to use Cleaning dust tank Tank separation lever Pull out Tank handle • Press tank separation button and pull out dust tank. • Raise dust tank cap • Dry fully in shade so that moisture is entirely removed. NOTICE If suction power decreases after cleaning dust tank, clean air filter and motor safety filter.
• Air filter and motor safety filter should be cleaned in the above case. Dust separator NOTICE If filters are damaged, do not use them. In this cases, contact LG Electronics Service Agent. Wash filters at least every 3 months. Pre-filter cover...
How to use Cleaning exhaust filter Exhaust filter cover Exhaust filter Button Lever Exhaust filter cover • The exhaust filter is a reusable. • To clean the exhaust filter, remove the exhaust filter cover on the body by pulling it out. •...
How to use Storage method after use • Turn off the power switch and unplug the power. • After using the microfiber cloth, directly clean the cloth. - Always separate the cloth after cleaning, and wash the cloth. When the cloth is exposed for a long time, it can generate a bad odor.
How to use Check before requesting for service You should not waste money by requesting for service only to find out that it's not a problem. If you experience any issues with the product, check the following details before contacting the service center or the distributor.
How to use Check before requesting for service You should not waste money by requesting for service only to find out that it's not a problem. If you experience any issues with the product, check the following details before contacting the service center or the distributor.
Trouble Shooting Review this chart to find do-it-yourself solutions for minor performance problems. Any service or repair needed, other than as described in this User’s Guide, should be performed through your local LGE service center. Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing.
Page 28
Trouble Shooting PROBLEM Is the noise louder than usual? Smell Agitator does not turn POSSIBLE CAUSE • Clogged hose or wand • Clogged nozzle • Smell as the motor spins fast around the surrounding rubber • The filters of dust separator with dust is old or stored for a long time •...
Page 29
Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
Page 32
The LGE Customer Support Team can be contacted as follows : For all Consumer enquiries Line opening hours Monday-Friday 09:00 to 20:00, Saturday 09:00 to 18:00, Sunday 10:00 to 16:00, 0844 847 LGLG(5454) Phone (National Call Rate) www.lgelectronics.co.uk, E-mail then select “CONTACT US” 0844 847 1413 Made in Korea...
Need help?
Do you have a question about the VK9820SCAY and is the answer not in the manual?
Questions and answers