How to Use
The dust tank needs emptying when alarm sounds.
• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank
separation button.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as shown.
Assembling the dust tank
18
Emptying dust tank
Dust tank cap
① ① Push the button
② ② Pull out
Tank handle
NOTICE
• If suction power decreases after emptying the dust tank, clean the dust tank
next page
• Since the dust tank is full, alarm sounds for 1 min 30 sec and
suction power will decrease for a while, then vacuum cleaner will
turn itself off.
Moving the vacuum cleaner
• Don't grasp the tank handle when you are moving the vacuum cleaner.
The vacuum cleaner's body may fall when separating tank and body.
You should grasp the carrier handle when you are moving the vacuum cleaner.
Tank handle
Tank separation button
Carrier handle