Richell 80041 Instruction Manual page 2

Top door can be locked/unlocked as figure below.
1
Lock the Seat Belt.
Shoulder Seat Belt
Seat Belt Lock
Place this product where the latch
faces forward in the direction of your
vehicle. Then, attach the lap seat
belt around and lock the seat belt.
The top door can be opened as 120 degree angle. But, it is
designed to stand by itself to prevent a damage to the door
axis. When the top door comes off, stand it in 90 degrees
angle. Then, push in the door axis while supporting the top
cover from the inside.
Important!
l
Make sure to attach the top door to the top cover.
It may case a damage to the product.
l
Wring a towel soaked in mild detergent and water, and gently wipe the product. Do not use a scrub brush and/or
a polishing powder as these may cause scratches and/or discoloration to the product.
l
When using creosol or other disinfectants, make sure to dilute them, it may cause discoloration to the product.
l
Do not use harsh chemicals such as thinner, benzene, or alcohol as these may cause discoloration to the
product.
l
After cleaning, place the product in an airy and shady location to avoid discoloration, deformation, deterioration.
UPC
Dimension
Inside dimension
Material
l Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l If you have any comments regarding the product, please contact us using the contact information below.
Lock
Unlock
2
Hook the lap seat belt to the Hook
Hook B
Hook A
Lap Seat Belt
First, hook the lap seat belt to the
Hook A. Then, push overhang part
into the Hook B.
803840 800416 / 803840 800423
12.0"W x 19.5"D x 11.5"H
10.0"W x 17.0"D x 11.0"H
Main Unit ( Base Bed, Top Cover ), Handle : Polypropylene
Door : Polystyrene / Latch, Lock : ABS resin / Non-slip Feet : Polyurethane
Hook B
Lap Seat Belt
Hook A
Receiver of Door Axis
2
3 Pull the Shoulder Seal Belt
Shoulder Seat Belt
Make sure the seat belt locks
correctly, hold this product and pull
the shoulder Seat Belt as the figure
above.
Door Axis
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
www.richellusa.com
Visit us at
MADE IN JAPAN
Lap Seat
Belt