fantastic furniture LEAN Bookcase Desk Large Narrow Manual page 5

Step 1
You will need
4 x Cam Bolts Phillips head
(H7) screwdriver
Attach 4 x Cam Bolts (H7) into Rails (P7, P8) with a Phillips head screwdriver.
Step 2
You will need
4 x Dowels 4 x Cam Nuts
(H2) (H8)
Flat head
screwdriver
Insert 4 x Dowels (H2) into Shelf Panel (P5).
Insert 4 x Cam Nuts (H8) into the holes of Shelf Panel (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P7, P8) to Shelf Panel (P5), then tighten the cam nuts using a Flat head screwdriver.
Step 3
You will need
4 x Small
2 x Long
Dowels (H1)
Screws (H6)
Phillips head
screwdriver
Insert 4 x Small Dowels (H1) into Shelf Panels (P3, P4).
Attach Rails (P6) to Shelf Panels (P3, P4) with 2 x Long Screws (H6).
Tighten Screws using a Phillips head screwdriver.
www.fantasticfurniture.com.au
H7
(P7)
Rounded
H8
corner
H2
(P7)
H6
(P6)
H1
H1
(P3)
H7
H7
(P8)
H8
(P5)
H8
H2
This is how a cam nut works ........
(P6)
H1
H7
(P8)
H2
H8
H2
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H6
H1
(P4)
PAGE 5