Analog Input (Cn9); Encode Switch - RD RDEncLas400G Manual

2.8 Analog input (CN9)

LCM support analog input for analog voltage detecting. This interface gives much more flexible usage for
users. The definition is shown in table 2.7.
PIN Signal
PIN1 AGND
PIN2 AN_IN

2.9 Encode switch

FPS active level configuration
FPS signal support 5V and 24V. This can be select according different encoder status. In
default, the FPS is 5V logic level. Encoder switch configuration is shown as picture 2.9.
Analog output configuration
L_AN is an analog output signal. The scale of the voltage output can be 0~5V or 0~10V.
The scale that should be selected is up to the laser source requirement. In default, it is
0~5V. Encoder switch configuration is shown as picture 2.10.
SHENZHEN RUIDA TECHNOLOGY
RDEncLas400G intelligent laser control module
Table 2.7
Definition
Analog ground
Analog input
Description
0-10V
14