Laser Control Interface (Cn3, Cn4) - RD RDEncLas400G Manual

RDEncLas400G intelligent laser control module

2.4 Laser control interface (CN3, CN4)

Laser control interface gives laser control signals that include of laser gate, PWM, FPS, and analog. With
these signals, different laser sources can be supported such as UV laser, FIBER laser YAG laser, CO2 laser.
The signals for laser are defined as table 2.3.
Notice: LON, PWM and FPS can compatible with 24V or 5V. Active level of LON signal can be redefined
with parameter . User can changed it with configuration software based on RS232. LON, PWM at 5V level
(4)
support differential output. This is shown as picture 2.3. FPS signal level can be selected 5V or 24V (5) . L_AN
analog signal output scale can be selected from 0~5V to 0~10V (6) .
Picture 2.3 LON signal
SHENZHEN RUIDA TECHNOLOGY 10