Universal Input (Cn2) - RD RDEncLas400G Manual

2.3 Universal input (CN2)

LCM outputs laser gate signal in real time by detecting the laser control signals from the motion
controllers. This is shown as picture 2.2. Active low is in default. But user can change the active level by
change the parameter (1)
When a laser piercing is needed, there is another signal specialized for laser piercing.
It is active low. If a low level is active, the LCM will output a piercing power for laser piercing.
NOTICE:
Parameter in the laser item
names input active level.
Change it to "High" level
when the external input is
high valid level. Otherwise
select "Low".
SHENZHEN RUIDA TECHNOLOGY
.
Picture 2.2 laser control principle
RDEncLas400G intelligent laser control module
8