Advertisement
Entering a Product and Tank
Volume
1. Select the sprayer-controller icon.
2. Expand the sprayer-controller panel.
3. Select the product title, finish the wizard for rate, and
confirm
(Figure
3).
1
1. Sprayer-controller icon
2. Expand icon
Creating a Field
Note: It is recommended to create one field per course with
all field boundaries for that course under that field.
1. Select the field-menu icon.
2. Select the new-field icon.
3. Select the field name, name the field, and confirm
(Figure
4).
3
Figure 3
3. Select the product and
finish the rate wizard
2
1. Field-menu icon
2. New-field icon
Creating New Field Boundaries
in Standard Mode
Note: Ensure that the display is in standard mode to create
boundaries.
Note: Ensure the units are correct for your use. Refer
to Selecting the Correct Units of Measure in the Operator's
Manual.
Creating a New Field Boundary using
Vehicle-Position Tracking
The boundary is created at the outside of the front, left tire.
1. Drive to the area.
2. Select the field-menu icon.
g031479
3. Select the record-field boundary icon.
2
3
2
1
Figure 4
3. Field name
g031480
Advertisement
