LG KM900 User Manual page 109

connecting to an AP with that
Security type.
3) If the AP does not support
DHCP, you can connect to the
AP using a static IP address.
2 Description of each field in the
Wi-Fi profile.
1) Network name: SSID (ID)
2) Security type: WEP, WPA-PSK/2
support.
3) Security key: saves the security
key.
4) IP/DNS setting: this allows you
to set to Automatic or Static
depending on whether the AP
supports DHCP.
For Static, enter the field value
of the IP address and DNS
server to use with the static IP
address when connecting.
3 How to save the Wi-Fi profile
1) Select Saved networks from
the Options menu, then select
New network and enter
values into each field.
2) It is possible to select and save
the AP search list by selecting
Wi-Fi On and then Refresh
(Searching AP).
3) After connecting to an AP with
this Security type, the profile
will be saved automatically.
3. How to obtain MAC
address
For setting up a connection in some
wireless networks with MAC filter
you may need to enter the MAC
address of your KM900 into the
router.
1 Touch Wi-Fi from the settings tab,
then open the options menu.
2 Select My MAC Address and it will
be displayed.
01
02
03
04
05
06
07
08
107