Alula RE929R Quick Start Manual

LTE Expansion Card
connectivity to the panel. It can be used as either the primary or
backup connection method.

Features

• Connects panel to the LTE cellular network
• Provides primary or backup network connection

Installation

1. Set up an account in the AlulaConnect
portal.
2. Install the communicator into the panel
using the steps below:
• Disarm and then power down
the panel.
• Plug the expansion card into
Slot 1 of the panel.
• Place Antenna 1 as shown at
the bottom of the panel.
• Place Antenna 2 as shown at
the top of the panel.
• Power up the panel.
• Installation is complete.
Events are reported
events use Contact ID reporting codes.
Events Reported by Default:
• Alarm
• Alarm Cancel
• Opening
• Closing
• System Low Battery
• System Low Battery Restore
• AC Power Fail
• AC Power Restore
Interactive control and viewing
Verify proper installation and operation using the panel's installation manual.
RE929R LTE Expansion Card
Connect+
is an LTE cellular device that provides network
to both the monitoring receiver and the interactive server. All
of the system can be done through AlulaConnect.com.
Encrypted
™
Antenna 2
Antenna 1
I
Expansion Card