Table of Contents
Advertisement
3. Counting Information
-
------------
STATISTICS
When the counting is completed, the total value and total
number of banknotes are displayed on the LCD, and if
Deno
Pcs
Value
0
0
10
report of counting results. Press - button again to turn
0
to the next page if there are more denominations on the list.
15
--
Reject Reasons
Press
4. Print Function
If the machine is connected to the printer, you can print the report by pressing the
5. Batch Counting
When you need to count out equal batches of banknotes, press the - button. When
"100" is displayed on the LCD, the "BATCH" function has been turned on and the current batch
setting is 100. Each time you press the - button, "100, 50, 20, 1 0 and ---" will be
displayed in turn. Press • button to save the setting.
When switched to "---", the batch function is disabled. You can press or hold the -
button to increase the batch number by 1 or 1 0 according to the requirement of the banknotes
counting. The batch value may be set in the range of 1-200. After setting the batch number, put
button is pressed, the machine will provide a detailed
.
to view the reject reason.
or
-
button.
the banknotes on the hopper and the machine will start counting automatically. At reaching the
batch number of banknotes, the machine will stop automatically. When the batch is removed from
the stacker, next batch will be counted out.
Press - button to clean the preset value.
6. Cumulative Counting
-----
USD
Mix
ADD
B=---
0
PCS
�VAL
0
When you need cumulative counting, press the
- button on the control panel, if "ADD" is displayed
'
I
M
201�0�182119
on the LCD, the machine will count starting from the original
-----
number displayed on the LCD. When the counting is
completed, the number displayed on the LCD is the total
USO
Mix
B=---
value of all consecutive stacks of banknotes. When the total
0
PCS
number of banknotes reaches 9999+1, or total value
reaches 9999999+1, the number will be reset to 0.
$VAL
0
'
I
M
2019-0 8-18 21: 1 9
mi
Advertisement
Table of Contents
