Part 2 Detection Error Messages And Solutions - Carnation CR1500 User Manual

Error message
Please Clean Left
Counting Sensor! Remove the banknote from the machine and/or remove dust from the
Please Clean Right BX IR sensor.
Counting Sensor!
MG# 1 Fault
MG#2 Fault Please contact your dealer for further assistance.
MG#3 Fault
MG#4 Fault
Please contact your dealer for further assistance.
MG#5 Fault
MG#6 Fault
MG#? Fault Please contact your dealer for further assistance.
MG#8 Fault
MID-MT Fault Please contact your dealer for further assistance.

Part 2 Detection error messages and solutions

If the following error message is displayed on the LCD during counting, you can handle them as per
the following solutions after the machine is stopped.
Error message
Chained#1
1. Some banknotes are attached to each other or overlapping.
Chained#2
2. Place the banknotes from the stacker back to the hopper and re-count.
Chained#3
3. If frequently displayed, tum the adjusting screw anti-clockwise to make the gai:1
Chained#4
smaller.
Chained#5
1. Some banknotes are attached to each other or overlapping.
2. Place the banknotes from the stacker back to the hopper and re-count.
Double
3. If frequently displayed, tum the adjusting screw anti-clockwise to make the gai:1
smaller.
Composed-Error The banknote is a splicing one. Remove the banknotes.
Solutlons
Solutions
Error message
Comer Folds
Count Error
Crumples
Deinked
Fold
Graffiti
Holes
Image
lmage#1
lmage#2
lmage#3
1. Select the right currency (the same type as the currency you are counting).
lmage#4
2. Please contact your dealer to do the calibration.
lmage#5
lmage#6
Image#?
lmage#8
lmage#9
Limpness
Mutilation
Repairs
Soiling
Stains
Tears
Deno Diff
Face Diff
Old Ver
Orient Diff
Remove the banknotes and re-count.
SN Invalid
SN Repeat
SN-Error
Ver Diff
Half The banknote is in half. Remove the banknotes.
Solutions