2
Instructions for use
Installation and assembly
4
Connect the wire
Connect Valiryo® to the electrical network by plugging it in. Turn It on
4
2
to confirm it works (find the control pad's instructions on page 34).
Make sure it works properly. Try to connect the wire again in
case it does not.
Plug Valiryo® out of the electrical network, introduce the wire into the
4
3
column's slot, remove the adhesive paper from the branded plate and
stick the branded plate on Valiryo®.
A
5
DETALLE A
Plug VALIRYO
ESCALA 1 : 5
www.valiryo.com
in and, done!
®
34