Valiryo Body dryer Instruction Manual page 29

1
Instructions for use
Security warnings
In case you want to connect Valiryo® to your home's
El secador debe ir anclado a la pared y en posición vertical. electrical network permanently, please contact a
professional installer.
No enchufes el secador hasta que esté anclado.
If you are not a professional installer, SKIP THIS PAGE.
Steps to follow ONLY by a professional installer.
Find a power outlet or a junction box.
1
Cut Valiryo®'s power supply cable casting the connection plug
2
aside in order to access L and N.
Connect Valiryo®'s wiring to the building's electrical network.
3
Remember to settle a turn-off system from permanent installation.
This appliance can be connected only to a supply with system
impedance no more than 0,033 Ω. In case necessary, please consult
your supply authority for system impedance information
It is recommended to install Valiryo® through the false ceiling.
If installation is done through the wall, Valiryo®'s wiring is placed at
203 cm from the floor (when leaving a 10 cm margin between the
floor or shower plate and the lower part of Valiryo®).
EN - Instruction manual
25