Advertisement
Function Summary and Button Definition
◆Function Summary
KD59E has many many functions to meet the users' need. The indicating contents
are as follows:
●
Smart battery indicator
●
Assistance-level indicator
●
The push-assist function
●
The Lighting On/Off (optional）
◆Button Definition
There are three buttons (
functions respectively ON/OFF, UP and DOWN.
General Operation
◆Switching the E-bike System On/Off
To switch on the E-bike system, hold the MODE button for 2s.
Likewise, hold the MODE button for 2s again, the E-bike system will be switched off.
When E-bike system is switched off, the leakage current is less than 1 μA.
■
When E-bike is parked for more than 10 minutes, the E-bike system will be
switched off automatically.
◆Switching the Lighting On/Off
To switch on display backlight and E-bike headlight, hold the UP button for 2s.
The battery indicator light and power assist level indicator light became faint at the same
time.
Likewise, hold the UP button for 2s again, the headlight will be switched off. The
battery indicator and power assist level indicator recover brightness at the same time.
◆Switching Push-assist mode On/Off
To access the push-assist mode, keep holding the DOWN button, the E-bike will go
on at a uniform speed of 6 Km/h. Meanwhile, 5 power assist indicator lights will be
circularly displayed in turn.
The push-assist function is switched off as soon as you release the DOWN button.
■
Push-assist function may only be used when you push the E-bike. Be aware of
danger of injury when the bike wheels do not have ground contact.
◆PAS Level Options
Assistance level indicates the output power of the motor. The default value is level "1".
Press the UP/DOWN button to select power assist level, the default power ranges
from level "0" to level "5". The output power is zero on Level "0". Level "1" is the minimum
power. Level "5" is the maximum power.
◆Battery Indicator
The five battery indicator lights represent the capacity of the battery. All five green LED
lights are on when the battery is in high voltage. When the battery is in low voltage, the
bottom LED light will blink to give a notice that the battery needs to be recharged
immediately.
◆Error code Indication
If a fault occurs in the electronic control system, the display indicator lights will blink.
Here is the reference of error definition in Attached list 1.
,
,
) on the KD59E display representing
2
Advertisement
