Safety Feature; Troubleshooting Tips; Maintenance - Ventamatic HETR H1800 Owner's Manual

SAFETY FEATURE

1. A thermal overload protector is built in to prevent overheating.
2. If an overheat temperature is reached, the Heater will auto-matically shut off. It can only resume
operation when the user resets the unit.
To Reset Heater:
1. Unplug the Heater and wait 10 minutes for the Heater to cool down.
2. After the Heater has cooled down, plug the unit into a 120V~electrical outlet and follow the
operation instructions described in this manual.
TROUBLE SHOOTING TIPS
If your heater shuts off unexpectedly or fails to operate, the previously mentioned safety feature may
have been activated to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
2. Check your Temperature setting. The Heater may be off because it has reached the desired
temperature setting.
3. If your Heater runs for several minutes and shuts off repeatedly, your Heater may require cleaning.
See Maintenance section below.
STORAGE: Store the heater with these instructions in the original carton in a cool, dry place .
DISPOSITION: Corrugated packaging materials are recyclable . For environmentally responsible
disposal of this product,contact your local waste service .

MAINTENANCE

To reduce the risk of electrical shock and fire please observe the following instructions.
Cleaning the Heater regularly will help to maintain its efficiency.
- Always unplug the cord before moving, servicing or cleaning.
- NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.
- Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove
the lint and dirt from the surface of the Heater.
- Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
- Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.
- NEVER attempt to take apart the Heater.
- Clean the body of the Heater with a soft cloth only.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh
cleaners.
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728
5
1-800-433-1626 Fax: 940.325.9311 www.BVC.com
5