Technical Data; Description; Operation; Loading Fasteners - Jula Meec tools 154-091 Operating Instructions Manual

Rated voltage
Capacity
Safety class
Sound pressure level, LpA
Sound power level, LwA
Vibration level
Always wear ear protection
The declared vibration value, which has been measured by a standardised test method, can
be used to compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may differ from the specified total value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are
required to protect the user, based on an estimate of exposure in actual operating conditions (taking into
account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in
addition to the start-up time).

Loading fasteners

1. Pull out the holder with one finger as far as it will go.
2. Fill with fasteners.
3. Press the nose of the tool against the surface so that the fastener at the front of the chamber is
pressed in.
ENGLISH

TECHNICAL DATA

230 V ~ 50 Hz
20/min
II
87 dB(A), K=3 dB
98 dB(A), K=3 dB
7.2 m/s², K=1.5 m/s²

DESCRIPTION

1. Trigger
2. Trigger lock
3. Power switch
4. Knob to adjust striking power
5. Control

OPERATION

19