Subscribe to Our Youtube Channel
Related Manuals for SWS ALUMTIG 200
Summary of Contents for SWS ALUMTIG 200
- Page 1 ALUMTIG QUICK START GUIDE PLEASE DOWNLOAD AND READ THE OPERATING MANUAL BEFORE OPERATION FOR IMPORTANT SAFETY INFORMATION!
-
Page 2: Machine Overview
ALUMTIG QUICK START GUIDE MACHINE OVERVIEW INDICATOR LED’S ROTARY ENCODER NEGATIVE DINSE PORT POSITIVE DINSE PORT TIG TORCH GAS OUTLET TIG TORCH/FOOT PEDAL CONNECTION POWER SWITCH GAS INLET COOLING FAN POWER CORD INPUT POWER 15 A Outlet - Use a suitable 15 amp power outlet. - Page 3 ALUMTIG QUICK START GUIDE MACHINE OVERVIEW ALUMTIG 200 READ OPERATORS MANUAL BEFORE USE 1. VRD - MMA ONLY: Voltage Reduction Device reduces maximum unloaded voltage of output terminals to safe levels. 2. POWER LED: When illuminated the machine is turned on.
- Page 4 ALUMTIG QUICK START GUIDE MAIN MENU ALUMTIG 200 ALUMTIG 200 AC/DC HF TIG GTAW HIGH FREQUENCY PRO READ OPERATORS MANUAL BEFORE USE TIG WELDING MODES HF (High Frequency) - This mode allows the arc to start without touching the tungsten to the metal being welded. It is also the preferred method when using AC.
- Page 5 ALUMTIG QUICK START GUIDE MAIN MENU ALUMTIG 200 ALUMTIG 200 AC/DC HF TIG GTAW HIGH FREQUENCY PRO READ OPERATORS MANUAL BEFORE USE MMA WELDING MODES MMA EASY - Ease of setup with optimum settings and ability to choose the electrode diameter then ne tune with the Amps.
-
Page 6: Tig Welding Setup
ALUMTIG QUICK START GUIDE TIG WELDING SETUP ELECTRODE NEGATIVE USING THE SWITCHED TIG TORCH TIG Torch Switch Mode - Plug in the TIG torch then turn on machine on to detect. If you do not detect the torch the amp control will not work. Torch Push Botton Switch - Starts and stops the TIG welding ark. -
Page 7: Using The Foot Pedal
ALUMTIG QUICK START GUIDE TIG WELDING SETUP ELECTRODE NEGATIVE USING THE FOOT PEDAL Foot Pedal Mode - Plug in the foot pedal then turn on machine on to detect the foot pedal symbol will show in the TIG welding screen. The foot pedal can also be used as a momentary switch by not detecting then operating it in 2T or 4T modes. -
Page 8: Mma Welding Setup
ALUMTIG QUICK START GUIDE MMA WELDING SETUP ELECTRODE POSITIVE MMA TORCH MMA Welding Mode - In most MMA welding applications DCEP (Direct Cur- rent Electrode Positive) is used. In some cases when welding very thin material reversing the polarity to DCEN can be an advantage. (MMA TORCH NOT INCLUDED.) - Page 9 ALUMTIG QUICK START GUIDE TIG WELDING FUNCTIONS Function PRE FLOW (1-10 Seconds) Purpose This parameter operates in 2T and 4T HF TIG mode only and is used to provide gas to the weld zone prior to striking the arc, once the torch trigger switch has been pressed. This control is used to dramatically reduce weld porosity at the start of a weld.
- Page 10 (for AC and DC). (HF is selected when symbol is not striked out) The lift start function on the ALUMTIG 200 provides a cold electrode for safety, and prevents accidental starts.
- Page 11 ALUMTIG QUICK START GUIDE TIG WELDING FUNCTIONS Function AC FREQUENCY (50-98% NA EASY MODES) Purpose Governs the number of times per second that the current alternates in AC mode. To achieve great- er arc focus (constriction) and increase puddle agitation while welding in AC mode, increase AC frequency.
- Page 12 ALUMTIG QUICK START GUIDE MMA WELDING FUNCTIONS Stick (MMA) PRO Functions Function HOT START (0-60 Amps) Purpose Sets the starting amps to reduce sticking of the electrode during the arc strike phase. Function WELD AMPS (10-200 Amps) Purpose Welding amps de ne the top limit of amps at which the machine has been programmed to operate.
- Page 13 ALUMTIG QUICK START GUIDE WELDING RESOURCES To get started welding we recomend you checkout the abundance of great resoruces available online. You can learn from some of the best welders across the globe from your shed. Welding Tips & Tricks Tons of information on all sorts of welding.
Need help?
Do you have a question about the ALUMTIG 200 and is the answer not in the manual?
Questions and answers