Chase Verifone V400m Setup Manual

Download this manual

1. You should have already unpacked your card reader and activated your reader in the Chase

Merchant Center. If not, visit

Important: Your card reader should remain unplugged and powered off until you've

completed activating your device in the Chase Merchant Center.

2. Connect the Power cable

The card reader contains a battery that is designed to operate without being connected to

electrical power for several hours. Once the battery status icon on the card reader's

screen indicates that the battery charge level is low, the card reader must be connected

to electrical power and be fully recharged prior to using again without electric power. See

diagram below.

Merchant services are provided by Paymentech, LLC ("Chase"), a subsidiary of JPMorgan Chase Bank, N.A.

Setup Guide

Verifone V400m

chase.com/MyPaymentsCenter

Setting up and connecting

your card reader requires

just a few steps.

to complete your activation.

Need help?

Do you have a question about the Verifone V400m and is the answer not in the manual?

Page 1 Verifone V400m Setting up and connecting your card reader requires just a few steps. 1. You should have already unpacked your card reader and activated your reader in the Chase Merchant Center. If not, visit chase.com/MyPaymentsCenter to complete your activation.
Page 2 Your internet provider or local electronics retailer can give you suggestions. Merchant services are provided by Paymentech, LLC (“Chase”), a subsidiary of JPMorgan Chase Bank, N.A. ©2020 JPMorgan Chase & Co...
Page 3 Merchant serial number Settings Confirm data • Helpdesk may initiate screen “Offboard” and “Onboard” process for merchant Merchant services are provided by Paymentech, LLC (“Chase”), a subsidiary of JPMorgan Chase Bank, N.A. ©2020 JPMorgan Chase & Co...
Page 4 7. Setup process completes Merchant services are provided by Paymentech, LLC (“Chase”), a subsidiary of JPMorgan Chase Bank, N.A. ©2020 JPMorgan Chase & Co...