Fostex D-108 Service Manual page 25

9) Before fixing the MODEL 8345 to the D-108 rear panel, insert the 25-pin flat cable included in the MODEL 8345 package
into the connector J9 on the D-108 MAIN PCB assy .
10) Fix the MODEL 5040 to the D-108 rear panel by the following screws.
• 3 x B 3 x 6 BZn screws included in the MODEL 8345 package - Bracket section
• 4 x BBT 3 x 8 BZn screws included in the MODEL 8345 package - XLR connector section
11) Connect the following cables.
• 25-pin flat cable from the connector J9 on the D-108 MAIN PCB assy to the connector J1 on the MODEL 5040
PCB assy
• 5-pin connector cable W3 on the MODEL 5040 PCB assy to the connector J1 on the MODEL 5040 PCB assy
To
MAIN PCB
J1
BBT 3 x 8 BZn
BBT 3 x 8 BZn
D-108
25