Setup Settings - Sony KLH-40X1 Operating Instructions Manual

Setup Settings

Setup
Language : English
Timer Setting
ECO Mode : Off
Auto Shut Off :
Off
Advanced Setup
Information
All Reset
Sel : Set : Back
Language
Timer Setting
ECO Mode
Auto Shut Off
26
GB
HDMI 1
: Exit :
MENU
Select to display all on-screen settings in your language of choice: "English",
"Español", "Français", "Italiano", "Deutsch" or "
You can adjust time, display the built-in clock, or make the power go off
automatically.
"Clock Set": Sets the day of the week and the hour of the day.
"Clock Display": Displays the currently set time on the screen when set to "On".
"On/Off Timer": Sets the time at which the power is automatically turned on or off.
Note
If the built-in clock tends to lose time, the internal battery may be exhausted. Please contact
your authorized Sony dealer to have the battery replaced.
"Off": Select to view picture without the benefit of power saving.
"Low"/"High": Select to change brightness and reduce power consumption.
"Picture Off": Select to turn off the picture. Audio stays on with your selected
volume setting.
"On": The display automatically enters the standby mode when a signal is not input
to the video input connectors for more than about 5 minutes. The display
automatically enters the power saving mode when a signal is not input to the other
input connectors for more than about 30 seconds.
"Off": The display is not turned off automatically even when no signal is input to any
connector.
Tip
While in the standby mode, press the 1 (POWER) button on the display or the POWER ON
Switch on the remote control to turn the display on. In the power saving mode, the display is
turned on automatically when a signal is input.
To highlight an option and to change settings, press
F f G g
/ / / .
Press to confirm the selection.
The "Setup" settings include the following options:
".