Advertisement
Method of Usage
·Then turn the legs fixing cover over the round tube on both sides of the legs
(figure 3)
·Then use 2pcs M4 screws to fix the legs on the massage chair , turn up and
down to check if there are any problems to see if the wires and air hose get stuck
or not, then finish the installation. (figure 4)
3
4
8. Head cushions and backrest pad's dismounting and use manual
·You can decide whether to use the head cushion(recommend).
cushion allows you to control the intensity of the neck and shoulder massage.
The backrest cushion and the backrest is connected by zipper (1); the head
cushion and the backrest cushion is connected by velcro as show in the
illustration (2).
Zipper
Thread gluing
1
2
The head
18
Method of Usage
9.Floor Protection
·Please p lace the heavy massage chair
it may cause damage to wooden floors.
and chair should serve as protection to the floor.
Caution: Do not move the chairs with its wheels on wood floor, rough ground or in
a narrow space. Two people are required to lift the chair. During the lifting period,
take the calf rest end sealing plate and backrest cover grooves as the force-bearing
point(Please do not lift armrest directly.)
10. Method of Movement
· Make sure that all wires are far above the ground, tilt the backrest backward to
a certain degree (with the gravity center resting on the wheels), push the chair
forward or backward with your hands and finally resume the chair to the normal
position in a slow and gentle manner.
Note: Before movement you must turn off the power first and then unplug
the power cord, as well as the controller cord.
on
carpet, mat, or any soft object, for
The object placed between the wood
19
Advertisement
