Advertisement
Method of usage
4.Voice control operation
·When the massage chair is turned on or in standby mode, say "Alice Alice" to wake
up the voice control function.
·After the successful wake-up, the massage chair will reply "I am here". At this time,
the voice control entry corresponding to the function is realized within 6 seconds.
After the massage chair responds, the corresponding voice control function can be
realized; if not correctly stating any voice entry for more than 6 seconds, the voice
control function automatically turns off and needs to be reawakened.
·Note: When
using the
voice control function, please use English, with a moderate
speech rate. Voice commands should follow the Voice entry as noted below.
Voice control enter
Awakening words: "hi Alice". Answer: I am here.
Serial No
Voice control entry
Massage on
1
Massage close
2
3
Comfort Massage.
Relax massage.
4
Full body massage.
5
6
Neck and shoulder massage.
7
Back and waist massage.
Stretch massage.
8
9
Fixed massage.
10
Change the other mode.
11
Go little down.
12
Go little up.
13
Open the air pressure.
14
Close the air pressure.
15
Up the seat position.
16
Down the seat position.
17
Stop adjustment.
Answer entry
Answer: Ok, massage on.
Answer: Ok, massage close
Answer: ok, comfort massage
Answer: ok, relax massage
Answer: ok,full body massage
Answer: ok,Neck and shoulder massage
Answer: Ok,back and waist massage
Answer: ok,stretch massage
Answer: ok,fixed massage
Answer: Ok, change the other mode
Answer: Ok, go little down
Answer: Ok, go little up
Answer: OK, Open the air pressure
Answer: OK , Close the air pressure
Answer: Ok, Up the seat position
Answer: Ok, Down the seat position
Answer: Ok, stop adjustment
16
Method of usage
5.Bluetooth Player Operation
your
settings
1.Enter
smart device
and open the Bluetooth function to search the
new Bluetooth device(s) .
2. You will find the bluetooth named (IMCM-XXXX), choose it to pair with the
chair.
3.Turn on the Music Player in the smart device .
6.Turn Off the Power and Stop Massage.
·When pressing the power button during the massage, it will stop all the massage
functions immediately, the backrest and footrest will go back to the default posit
on.And when the massage time up, the massage hand will go back to the default
position, all the massage function will stop, the backrest and footrest will not go
back to the default position.
·Cut off the power of the whole machine. Figure (switch power off)
FUSE:
T5AL 250V
CONTROLLER JACK
ON/OFF
POWER INPUT
Diagram of the power switch position
7.The calf installation.
·
After connecting the wires and the air hose between the chair seat and the leg
rest , unfasten the fixed pipe belt and insert the connecting part into the seat
frame(figure 1).
·
Place the round tube from calf left and right sides to the legs brackets.(figure 2)
1
2
Unplug the power cord
17
Advertisement
