Sennheiser MobileConnect Station Quick Manual page 2

Dante
Out 1 Out 2 In 1 In 2
Primary Secondary
LAN
Variant 1:
Digital audio connection through
Dante™ network
Variant 3:
Switched mode
Rack mounting Rack mounting
1.
3.
*
Configuration via Audinate Dante Controller | www.audinate.com
Ctrl PoE / Stream
Dante™ DSP
Out 1 Out 2 In 1 In 2
Secondary
Primary Ctrl PoE / Stream
LAN
LAN
2.
*
*GA 3 rack mount set not included
Out 1 Out 2 In 1 In 2
Primary
LAN
Variant 2:
Digital audio connection through
redundant Dante™ networks
Out 1 Out 2 In 1 In 2
Secondary
Primary Ctrl
Dante™ DSP
Specification
Product properties
Dimensions W x D x H approx. 212 x 168 x 43 mm (8,4 x 6,6 x 1,7 ")
approx. 970 g
Weight
2x XLR-3F (input)
Audio inputs/outputs
2x XLR-3M (output)
2x RJ-45 Dante™ Digital Audio (input/output)
Network / Control 1x RJ-45 Control/PoE/Streaming
1x RJ-45 Control
PoE IEEE 802.3af Class 3
Supply voltage
Power consumption Max. 10 W
XLR connectors
Frequency response 40 Hz - 20 kHz
101 dB (A)
Signal to noise ratio S/N
Total harmonic
- 82 dB (A)
distortion THD + N
Audio inputs
Input impedance 10 kΩ
without gain: 18 dBu
Max. input level
with gain:
Audio outputs
Max. output level 4 dBu 600 Ω
8 dBu 200 kΩ
Ambient conditions
Operation:
Temperature range
Storage:
20 - 90 %, non condensing
Relative air humidity
Secondary Ctrl PoE / Stream
Dante™ DSP
Sec Pri
LAN
PoE / Stream
3 dBu
0 °C to +40 °C
32 °F to 104 °F
-10 °C to +60 ° C
14 °F to 140 °F