716 832-TENT ( 8368 ) STEP 1. CHECK ITEM LIST • Aluminum side and center poles • Rope and grommet lace lines Center Poles (tent size/quantity) • Ring and snap rain flap closures 30x40 (1) / 30x60 (x2) / 30x80 (x3) / 30x100 (x4) 40x40 (1) / 40x60 (x2) / 40x80 (x3) / 40x100 (x4) •...
Page 3
716 832-TENT ( 8368 ) STEP 3. LAY OUT TENT • Spread tarps (sold separately) • Unload poles and tent canopy Position tarp and tent in the exact position desired • Lay canopy over tarp • Remove slack • Square the canopy, measure from Section seam corner to corner—...
Page 4
716 832-TENT ( 8368 ) STEP 5. POSITION POLES (30X40 TENT) • Lay all poles, near grommet opening, touching the edge of canopy • Poles should be perpendicular to tent (except corner poles, see drawing) • Set aside center pole(s) Poles •...
Page 5
716 832-TENT ( 8368 ) FIGURE B. CLOVE-HITCH KNOT • A commonly used knot for securing a rope to stake is the clove-hitch 1.) Make two loops 2.) Cross loops by placing second loop over the first 3.) Place the combined loops over stake Option: loops can be form directly on stake 4.) Pull on both ends to tighten rope...
Page 6
716 832-TENT ( 8368 ) STEP 9. STRAIGHTENING POLES • Continue around the tent raising all side poles—now, at a vertical angle (cutaway view— showing all center poles) • Adjust corner poles (exactly vertical) and tighten ropes before finishing the side poles •...
Page 7
Mid-section (only) kits available Mid Section Kits for 30ft. and 40ft. wide tents— (sold separately, to extend length) to extend your sectional tent 16´ 7´ 20´ 20´ 30´ 30ft Wide (x4) 20´ Mid Kit (example) See TentandTable.com for more information.
Page 8
Appendix A. • Plans— showing pole location and section seams 30X40 TENT Pole positions 30X80 30X60 TENT TENT 30X100 TENT Canopy Section Seams (gray line) 40X40 40X100 TENT TENT 40X80 40X60 TENT TENT...
Need help?
Do you have a question about the BT-PP48WT4P and is the answer not in the manual?
Questions and answers