ASW 18-18; ASW 18-18-PC
Removal
Removing the motor housing
1
1. Remove the Sealing ring (1).
2. Slide back the cover (2).
3. Unscrew the eleven screws (3).
4. Pry off the motor housing (4).
Place the screwdriver between the clutch and the upper part of the housing.
C-SC_CSSM
Version 1.0
2
2017-10-09
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
4
.
Tools:
- Flat-head screwdriver
40x2
- Flat-head screwdriver
90x4.5
- Torx T10
Page 1 of 9