Sony STR-DA4300ES Operating Instructions Manual page 46

a) This receiver corrects signals by analog
downmix processing only for the center speaker
and sub woofer when the multi-channel input is
selected. The correction is invalid for other
speakers.
b) The measurement result is not utilized when the
multi-channel input is selected.
c) • Signals with a sampling frequency of more than
96 kHz are always played back at either
44.1 kHz or 48 kHz.
• The measurement result is not utilized in the
following cases.
–The multi-channel input is selected.
–"2ch Analog Direct" is being used.
–Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 39).
46 GB
2
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Auto Calibration," then press
4
Press V/v repeatedly to select
"Quick Setup," then press
5
Press V/v repeatedly and
un-check the items you do not
want to measure.
• Speaker Distance
• Speaker Level
• Frequency Characteristic
1
6
Press b.
7
Press
2-7
8
The measurement starts in five
seconds.
or b.
to select "Start."
or b.
.
to