Advanced Speakers Setting Up; Adjusting The Speaker Settings Manually - Sony STR-DA4300ES Operating Instructions Manual

Advanced Speakers Setting Up

Adjusting the speaker
settings manually
You can adjust the each speaker manually.
You can also adjust the speaker levels after the
auto calibration is completed.
Making settings with the
Manual Setup menu
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 39).
72 GB
2
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker," then press
4
Press V/v repeatedly to select
"Manual Setup," then press
Manual Setup menu parameters
1
x Level
(Level of speaker)
You can adjust each speaker's level (center,
surround left/right, surround back left/right,
sub woofer). You can adjust the level from –20
dB to +10 dB in 0.5 dB steps.
For the front left/right speakers, you can adjust
the balance on either side. You can adjust the
front left level from FL–10.0 dB to FL+10.0
2-4
dB in 0.5 dB steps. You can also adjust the
front right level from FR–10.0 dB to FR+10.0
dB in 0.5 dB steps.
Note
When one of the sound fields for music is selected,
no sound is output from the sub woofer if all the
speakers are set to "LARGE." However, the sound
or b.
.
.